home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lwml9505.txt
/
000125_owner-lightwave@webcom.com_Mon May 15 10:59:18 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-06-03
|
2KB
Received: by webcom.com
(1.37.109.15/16.2) id AA268580758; Mon, 15 May 1995 10:59:18 -0700
Return-Path: <owner-lightwave@webcom.com>
Received: from mail.crl.com by webcom.com with SMTP
(1.37.109.15/16.2) id AA268320750; Mon, 15 May 1995 10:59:10 -0700
Received: from crl.crl.com (crl.com) by mail.crl.com with SMTP id AA11756
(5.65c/IDA-1.5 for <lightwave@webcom.com>); Mon, 15 May 1995 11:01:19 -0700
Received: by crl.crl.com id AA07027
(5.65c/IDA-1.5 for Lightwave <lightwave@webcom.com>); Mon, 15 May 1995 11:01:17 -0700
Date: Mon, 15 May 1995 11:01:17 -0700 (PDT)
From: Carl Andrew Johnson <cjohnson@crl.com>
To: Lightwave <lightwave@webcom.com>
Subject: Transparency
Message-Id: <Pine.SUN.3.91.950515105444.6444A-100000@crl.crl.com>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-lightwave@webcom.com
Precedence: bulk
I'm trying to create a Wall of Flames. I created a pretty good texture
using Kai's Power tools. The difficult part is getting both the edges and
portions of the interior to be transparent. I can create a transpaency
map where the edges are partially transparent, but I can't animate it
because the top edge has to remain partially transparent.
I guess to be a little more descritive, I have a flat plane that will be
my wall. It's got a fire texture moving up in the Y axis. I have
transparency map that is also moving up the axis, but at a different
rate. If I make the left and right side transparent, can't make the top
transparent and still move it up along the y axis.
Suggestions?
--
Carl Andrew Johnson <cjohnson@crl.com> sent this message.
To Post a Message : lightwave@webcom.com
Un/Subscription Requests To : lightwave-request@webcom.com
(DIGEST) or : lightwave-digest-request@webcom.com
Administrative Items To : owner-lightwave@webcom.com